The code loaded into the Raspberry Pi

Here is the code. I used joystick movement to start recoding once I was inside the airplane with Raspberry Pi seating in the overhead locker. 

 from sense_hat import SenseHat, ACTION_PRESSED, ACTION_HELD, ACTION_RELEASED

from datetime import datetime

import csv

import time

import sys

sense = SenseHat()

sense.set_imu_config(True, True, True) # accelerometer, magnetometer , gyroscope

sense.clear()

logging = "standby"

def get_sense_data():

 sense_data = []

 temperature = round(sense.get_temperature(),0)

 pressure = round(sense.get_pressure(),0)

 humidity = round(sense.get_humidity(),1)

 sense_data.append(temperature)

 sense_data.append(pressure)

 sense_data.append(humidity)

 

 mag = sense.get_compass_raw()

 mag_x = round(mag["x"],2)

 mag_y = round(mag["y"],2)

 mag_z = round(mag["z"],2)

 sense_data.append(mag_x)

 sense_data.append(mag_y)

 sense_data.append(mag_z)

 acc = sense.get_accelerometer_raw()

 acc_x = round(acc["x"],3)

 acc_y = round(acc["y"],3)

 acc_z = round(acc["z"],3)

 sense_data.append(acc_x)

 sense_data.append(acc_y)

 sense_data.append(acc_z)

 

 gyro = sense.get_orientation()

 pitch = round(gyro["pitch"],2)

 roll = round(gyro["roll"],2)

 yaw = round(gyro["yaw"],2)

 sense_data.append(pitch)

 sense_data.append(roll)

 sense_data.append(yaw) 

 

 sense_data.append(datetime.now())

 

 return sense_data

def pushed_up(event):

 global logging#, timestart

 if event.action == ACTION_PRESSED:

 #print("START")

 sense.clear()

 sense.show_letter("R",[255,0,0])

 logging = "start"

def pushed_down(event):

 global logging

 if event.action != ACTION_PRESSED:

 #print("STOP")

 sense.clear()

 sense.show_letter("W",[0,255,0])

 logging = "standby"

def pushed_left(event):

 global logging

 if event.action != ACTION_PRESSED:

 #print("STOP")

 sense.clear()

 sense.show_letter("B",[0,0,255])

 sense.clear()

 logging = "stop"

sense.stick.direction_up = pushed_up

sense.stick.direction_down = pushed_down

sense.stick.direction_left = pushed_left

#timestamp = datetime.now()

#timestart = datetime.now()

#delay = 1000 #milliseconds

with open('data.csv', 'a') as my_data:

 #data_writer = writer(f)

 writer = csv.writer(my_data)

 #header = ['temp','pres','hum',

 # 'mag_x','mag_y','mag_z',

 # 'acc_x','acc_y','acc_z',

 # 'pitch','roll','yaw',

 # 'datetime']

 #writer.writerow(header) 

 

 while True:

 if logging == "start": 

 data = (get_sense_data())

 #dt = data[-1] - timestamp

 #elapsed = data[-1] - timestart

 #if int(dt.total_seconds()*1000) > delay:

 #print(round(elapsed.total_seconds()*1000))

 #data.append(round(elapsed.total_seconds()*1000))

 writer.writerow(data)

 #print(data)

 #sense.clear()

 #sense.show_letter("R",[255,0,0])

 time.sleep(1)

 elif logging == "standby":

 sense.show_letter("W",[0,255,0])

 elif logging == "stop":

 #sense.clear()

 #sense.show_letter("B",[0,0,255])

 sense.clear()

 time.sleep(1)

 break

 

#timestamp = datetime.now()